The Lazy Guide to Cutting Your Home Energy Costs — 6 Simple Things to Start Doing Today

News Room
6 Min Read

You don’t need a contractor or a loan to lower your monthly utility bills. While major renovations like installing solar panels or replacing windows get all the headlines, they also require a massive upfront investment that takes decades to pay off.

The reality is that much of the energy waste in a typical home comes from small inefficiencies and default settings that work against you.

By making a few tweaks that require almost no physical effort or handyman skills, you can keep hundreds of dollars in your pocket every year.

1. Wash clothes in cold water

For decades, we were taught that hot water was necessary to get clothes truly clean. That is no longer true. Modern detergents are enzymatic, essentially meaning they are specifically engineered to work effectively in cold water.

According to Energy Star, about 90% of the energy used by your washing machine goes solely toward heating the water. By switching your dial to cold, you eliminate that cost entirely and lower your energy bill.

Unless you are dealing with oil-based stains or sanitizing sick-bed linens, cold water cleans just as well and preserves fabrics longer, preventing the fading and shrinking that hot water causes.

2. Lower your water heater temperature

Most water heater manufacturers set their thermostats to a default of 140 degrees Fahrenheit. This is generally hotter than necessary for most households and poses a scalding risk. It also means your heater is working overtime to maintain a temperature you likely mix with cold water anyway before it hits your skin.

The Department of Energy recommends lowering this temperature to 120 degrees. This simple adjustment slows mineral buildup and corrosion in your tank and can save you up to $61 annually on standby heat losses.

You won’t notice a difference in your morning shower, but you will notice it on your bill.

3. Clean your refrigerator coils

Your refrigerator is one of the few appliances that runs 24 hours a day, making it a significant contributor to your electric bill. If the condenser coils — usually located at the bottom or back of the unit — are coated in dust and pet hair, the fridge has to work much harder to release heat.

Dirty coils force the compressor to run longer and hotter, which increases energy consumption and shortens the appliance’s lifespan.

Once or twice a year, take a few minutes to vacuum these coils. It is a five-minute task that ensures your most expensive kitchen appliance runs efficiently.

4. Adjust your thermostat by one degree

You do not need to freeze in the winter or sweat in the summer to see savings. The logic of temperature control is incremental. For every degree you adjust your thermostat back from its normal setting, you can save about 1% to 3% on your heating or cooling bill.

If you normally heat your home to 72 degrees Fahrenheit in the winter, try 71. It is unlikely you will feel the difference physically, but over a month, that small shift reduces the workload on your HVAC system significantly. If you have a programmable thermostat, ensure it is actually programmed to match your schedule so you aren’t heating an empty house.

5. Let your dishes air dry

The heated dry cycle on your dishwasher uses a significant amount of electricity to bake moisture off your dishes. In many cases, it is unnecessary. The residual heat from the wash cycle is often enough to dry porcelain and glass if you simply open the door a crack once the cycle finishes.

Most modern dishwashers have an air dry or energy saver setting that automates this. If yours doesn’t, just turning off the heat dry function and letting nature do the rest cuts the dishwasher’s energy use by roughly 15%.

6. Change your HVAC filters regularly

This is a maintenance task that often gets ignored because the filter is hidden away in a closet or ceiling. However, a clogged air filter is a financial drain. When a filter is full of dust, your blower fan has to work significantly harder to push air through the system.

This increased strain raises your energy consumption and can lead to premature system failure. Replacing a dirty filter with a clean one can lower your air conditioner’s energy consumption by 5% to 15%.

Buy a pack of filters at once and set a recurring reminder on your phone so you never have to worry about remembering it.

Read the full article here

Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *